Star Micronics TUP400 3. Printer Mechanism, 4. Main Logic Board

– 39 –
3. Printer Mechanism
(1) Remove the power supply connector.
(2) Remove:
•Screws 4 pcs. [1]
•Connector [2]
Cut the wire band in four places.
•Printer Mechanism [3]
Refer to Step 4 to remove the connector which is
connected to the main logic board from the printer
mechanims.
4. Main Logic Board
(1) Remove the power supply connector.
(2) Remove:
•Four screws [1]
•Wiring band
•Connectors
•Screws 4 pcs. [2]
•Main Logic Board [3]
When removing the wiring band, check which one
is the lead wire.
[1]
[2]
[3]
[1]
[2] [1]
[3]