•First edition : Aug.1997
•Second edition : Jun. 1998 Add interface board Ver. 2
•Third edition : Mar. 1999 Add TUP492
•Fourth edition : Feb. 2001 Add TUP400Z
•Fifth edition : Sep.2001 Add TUP412/412Z Parts List
INTRODUCTION
This manual was created as a reference for maintenance of the Thermal Printer TUP400 Series for
personnel who are responsible for periodic inspections or troubleshooting of that equipment. This manual
was written for maintenance personnel, and was not intended to be used by the general operator.
This manual is organized into the following chapters.
Chapter 1 Specifications and Operation
Chapter 2 Theory of Operation
Chapter 3 Parts Replacement and Related Adjustments
Chapter 4 Maintenance and Lubrication
Chapter 5 Parts Lists
Model Name
1
3
2
5
4
TUP4 5 2 Z V2 D 24 NL
No Transparent Laser
TUP400 series
Voltage
24 : 24 VDC
Interface
D : RS232C
C : Parallel
K : RS422A
Printer type
1 : No Cutter
5 : Guillotine Type Full Cutter
8 : Guillotine Type Full Cutter + Presenter
9 : Guillotine Type Full Cutter + Document Capture
Board type
None : Ver.1
V2
: Ver.2
Printing speed
None : Max. 50mm / sec
Z
: Max. 80mm / sec
Mechanism type
2 : 40 columns