– 27 –
14.3 Allowable Static Electricity Level
Notes)
●
Use SLS-060P-50 (Sanken) as the power source.
●
The reference data is shown in the table above; this data may differ depending on the installa-
tion conditions.
14.4 Vibration Test
14.5 Drop Test
Quality control
test specifications
Direct discharge Element allowable level
(self-printing)
± 8 kV (*1)
No fracturing of elements allowed ± 15 kV
Indirect discharge Element allowable level
(self-printing) ± 15 kV
Checker connection allowable level
(continuous printing) ± 3 kV (*2)
Direct discharge error: ≤5% (*1) ±10 kV test is also performed.
Indirect discharge error: 0% (*2) ±5 kV test is also performed.
Item Specification
Frequency 7 ~ 100 ~ 7 Hz (sweeping: 2.5 minutes)
Amplitude 15.3 ~ 0.07 mm
Gravity 1.5 G (constant)
Vibration direction and
time 1 hour in each direction: X, Y and Z
Total of 3 hours
Packing As small as possible
Item Specification
Drop height 80 cm
Drop sequence One corner, three edges and six surfaces
Packing As small as possible