Star Trac E-TBT manual Operating Instructions, Display Panel Features

Using a 3/16” Allen wrench and five 1/4”-20 X 1/2” socket head screws, secure the upper body arm to the hub. Tighten the screws to 240 lb-in(27 N-m) of torque.

Repeat for the right-side upper body arm.

NOTE: Be sure all five upper body arm mounting screws are tightened securely. Check the condition of these screws regularly as described under “Preventative Maintenance.”

1/4-20 x 1/2”

SOCKET HEAD SCREWS

4. Leveling the Unit

Place the Total Body Trainer on the floor in the position in which it will be used. Use the leveling adjusters (located on the underside of the rear feet) to compensate for uneven floor surfaces and to eliminate wobbling.

Operate the unit to check for proper operation.

Make sure that all screws are tight.

OPERATING INSTRUCTIONS

Operating the STAR TRAC E SERIES TOTAL BODY TRAINER is very easy. Simply access the Total Body Trainer by stepping on to the Soft Trac® pedals, begin striding, and press QUICK START. Learning the features and incorporating the STAR TRAC E SERIES TOTAL BODY TRAINER into your members' fitness programs is just as easy. In this chapter, you will learn the display functions and how to get the most out of every STAR TRAC E SERIES TOTAL BODY TRAINER workout.

IMPORTANT: Before operating the Total Body Trainer, you must be familiar with the following equipment limitations:

■Maximum Weight: Your STAR TRAC E SERIES TOTAL BODY TRAINER is designed for a maximum user weight of 350 lbs/159 kg. DO NOT exceed the maximum user weight.

DISPLAY PANEL FEATURES

Your STAR TRAC E SERIES TOTAL BODY TRAINER is equipped to provide you and your users unlimited exercise opportunities. Experiment with its features to find the right com- bination for your fitness regimen. The Display panel provides the operating controls and display elements described in the follow- ing paragraphs, and is consistent for both the Pro and Elite Total Body Trainers.

QUICK START Key: Enables the Total Body Trainer for manual operation using a default weight as set in Maintenance Mode, a default LEVEL of "1", and a default time limit as set in Maintenance Mode.

NOTE: Default time and weight are adjustable through Manager/Maintenance Mode. See Chapter 7 for details.

MESSAGE	FAN CONTROL
	KEYPAD
WINDOW
	i PULSE

MOTIVATIONAL

TRACK

	UPPER DATA
	INFORMATION
PROFILE	WINDOW
DISPLAY	LOWER DATA
	INFORMATION
	WINDOW
PRESET	NUMERIC
PROGRAMS
	KEYPAD
KEYPAD
SELECT FIT	LEVEL ADJUST
KEYPAD	KEYPAD
	QUICK START
	KEYPAD

STAR TRAC E SERIES TOTAL BODY TRAINERS OWNER’S MANUAL 13