SSV 05/2R
2.2. Installing the conveyor hopper
The single conveyor unit is not sensitive to shocks and can be installed directly on the processing machine.
Make sure that all connections are tight so that the conveying performance is not impaired.
The conveyor hopper is equipped with a universal flange.
Depending on the position, drill the holes for fastening the conveyor hopper to the processing machine.
Mount the conveyor hopper on the processing machine.
Install the supply hoses on the conveyor hopper and on the injector tubes by means of the hose clamps which are part of the supply.
F
Note that the hopper may not touch any other component.
