![](/images/new-backgrounds/1316295/31629561x1.webp)
SSV 05/2R
5.4. |
|
Problem | Remedy |
The unit is not conveying |
|
and is not active | a, b, g, h |
The unit is not conveying; |
|
the |
|
when the device is switched on | c, f |
The unit is not conveying, |
|
the compressed air is flowing audibly | c, d, e, f, i, j, k |
The unit is overfilled | g, l, m |
The unit is not filled properly | c, d, e, f, i, j, k, l |
Test steps |
|
a)Check whether the unit is switched on.
b)Check whether the mains connector is connected and mains voltage is pres- ent.
c)Check whether sufficient compressed air is available.
d)Check whether the injector tube is inserted in the material.
e)Check whether the
f)Check whether the
g)Check whether the level probe is properly adjusted.
h)Check whether the cable of the level probe is properly connected.
i)Check whether the filter is clogged.
j)Check whether the sieve is clogged.
k)Check whether the conveyor hose is properly connected.
l)Check whether the
Maintenance 30