Panasonic DMC-FZ10PP operating instructions Troubleshooting, 128

Models: DMC-FZ10PP

1 144
Download 144 pages 25.32 Kb
Page 128
Image 128

Others

Troubleshooting

1:The camera is not turned on.

1-1: Are the battery inserted or the AC adaptor correctly connected? Check the connection.

1-2: Is the battery sufficiently charged? Use the battery that has been sufficiently charged.

2:As the camera is turned on, it

turns off immediately.

2:Is the battery charge insufficient to operate the camera?

Use the battery with charged one.

6:The screen is too bright or dark.

6:Adjust the brightness of the screen.

7:Flash is not activated.

7:Is the flash closed?

Press the [ OPEN] button to open the flash.

8:Unreadable language was selected by mistake.

8:Select [ ] icon on the [SETUP] menu to set the desired language.

3:The brightness of the screen changes dark or bright for a

moment.

3:This phenomenon appears when pressing the shutter button halfway to set the aperture value and does not affect the recorded pictures.

4:The picture cannot be recorded. 4-1: Is the card inserted?

4-2: Is the mode dial correctly set? Check it.

4-3: There is no memory capacity left on the card. Before recording, delete some pictures.

5:The picture is not displayed on the LCD monitor.

5:Does the picture appear on the Viewfinder?

Press the [EVF/LCD] button to switch to LCD monitor display.

9:The subject is not focused

properly.

9-1: Is the subject out of the focus range?

9-2: When you cannot focus on the subject even if you tried many times, once turn the camera off and turn it on again.

10:The picture is not played back. 10-1: Is the card inserted?

10-2: Is there a picture in the card?

10-3: Is the mode dial set to playback [ ]?

128

Page 128
Image 128
Panasonic DMC-FZ10PP operating instructions Troubleshooting, 128