Others
Message Display
[NO MEMORY CARD]
Insert the card.
[THIS MEMORY CARD IS PROTECTED]
Cancel the card lock.
[NO VALID IMAGE TO PLAY]
Play back after recording or after inserting the card with a recorded picture.
[MEMORY CARD FULL] /
[NOT ENOUGH MEMORY IN THE CARD]
Insert a new card or delete the unnecessary data.
[PLEASE CLOSE THE FLASH]
Be sure to close the flash after use.
[MODE DIAL IS NOT IN THE PROPER POSITION]
This message appears when you turn the camera on with the mode dial in the wrong position.
Rotate the mode dial to the proper position.
[PLEASE SET THE CLOCK]
This message appears when you use the camera for the first time or you do not use the camera for a long time.
Set the clock.
[THIS PICTURE IS PROTECTED]
After cancelling the protect setting, you can delete or overwrite the picture.
[THIS PICTURE CAN’T BE DELETED] / [SOME PICTURES CAN’T BE DELETED]
The pictures not based on the DCF standard cannot be deleted.
[CAN’T BE SET ON THIS PICTURE] / [CAN’T BE SET ON SOME PICTURES]
If the pictures are not based on the DCF standard, the DPOF print cannot be set.
[NO ADDITIONAL DELETE SELECTIONS CAN BE MADE]
You have exceeded the number of pictures that can be set at once with
[MEMORY CARD ERROR FORMAT THIS CARD?]
The format of the card cannot be recognized by this camera. Format the card again with this camera.
[SYSTEM ERROR]
This message appears when the camera does not operate properly. Turn the camera off and on. If the message persists, contact the dealer or your nearest servicenter.
[MEMORY CARD ERROR]
Failed access to the card.
Insert the card again.
[READ ERROR]
Data reading error.
Play it back again.
[WRITE ERROR]
Data writing error.
Turn the camera off and remove the card. Then insert the card and turn the camera on again. Be sure that the camera is turned off before removing or inserting the card to avoid damage.
