Reviewing Pump Status
The “Pump Status” screen is the counterpart of the “Station Status” screen. To reach the “Pump Status” screen from any other screen, touch PUMP STATUS on any screen. The “Pump Status” screen appears.
Figure 10: “Pump Status” Screen During Operation
The status of each pump is
1.Touch HELP button. The “HELP Menu” screen appears.
2.Touch PUMP STATES. The “Pump Symbols Help” screen appears, explaining the status represented by each color.
3.When you are finished reviewing the information, touch HELP MENU.
The following table explains the status represented by each color at the Station Status screen.
Color | Label | Description |
Gray outline | Offline | Pump is not enabled. The controller ignores any alarms. |
Green | Ready | Pump is off, waiting for demand from a station. |
Light Blue | Idle | Pump is on, waiting for demand from a station. If there is no |
|
| demand before the end of the auto shutdown delay, the pump |
|
| will turn off. |
Blue | Convey | Pump is conveying material to a station. |
Red, | Alarm | Pump is in alarm. |
Red outline | Critical | Pump is in critical alarm. The controller has disabled the pump |
|
| until the alarm is cleared. |
Yellow | Ramping | Pump is in process of starting or stopping. |
| Up/Down |
|
Additional basic information about each pump, including configuration settings and the number of hours the pump has been running, is available at the “Pump Setup” screen. For details on configuration settings, see page 37. For details on the hour meter, see page 31.
4 | Chapter 4: Operation | 25 of 44 |
