Tiller control functions
Battery Gauge (Fig. 9): Located on the centre of the control panel. It indicates the average amount of charge you have in the batteries. Green indicates fully charged batteries. Yellow indicates caution and approximately
Indicator Switch (Fig. 9): Located on right/left corner of control panel. Press the left or right switch whenever left or right direction is intended. Press the switch again, the indicator light will be turned off.
Speed Adjustment Dial (Fig. 9): This allows you to preset your desired top speed. Turn the dial
Horn Switch (Fig. 9): Press switch to cause a warning sound.
Headlight Switch (Fig. 9): The scooter comes equipped with a head light which is activated by a push on/push off switch located near the centre of the control panel. The face of the switch is lighted in the “on” position. If the light is advertently left after the use, removal of key will extinguish headlight.
Hazard Light Switch (Fig. 9): This switch can be pushed on whenever the switch is turned on/off.
UK users Note: When driving on the pavement the speed should be set to the half mark
Lights | Battery Gauge | |
Head Lamp | Hazard Warning | |
Panel Light | Lights | |
Indicator | Indicator | |
Panel Lights | Panel Lights | |
Speed | On/Off Panel | |
and Status | ||
Adjustment | ||
Light (See | ||
Dial | ||
page 18) | ||
| ||
Left Horn |
| |
| Right Horn | |
Left Indicator |
| |
| Right Indicator | |
| Fig. 9 |
10 | Iss 4 |
|
|