ENGLISH

GB

 

 

SYMBOLS

The following symbols are displayed on the ma- chine in order to remind you about the safety pre- cautions and attention necessary when using the machine.

The symbols mean:

Warning! Read the Instruction Book and Safety Manual before using the machine.

Warning! Keep spectators away. Beware of objects being flung out.

Warning! Do not put hands or feet under the cover of the machine when it is run- ning.

Warning! Before starting any repair work, remove the spark plug cable from the spark plugs.

IMPORTANT

Certain models do not have a throttle. The motor speed is set for optimal function and minimal ex- haust emissions.

ASSEMBLING

HANDLEBAR

Lift the upper part of the handlebar and position it behind the machine. Move the lower part of the handlebar upwards and tighten the locking knobs

A(fig. 1).

Then fit the upper part of the handlebar. A securing eye for the starting handle is fitted on the right- hand side (fig. 2).

Storage position: Slacken the locking knobs on the lower part of the handlebar and move it forwards. Then slacken the locking knobs on the upper part of the handlebar and move it backwards (fig. 3).

Note that you must check to make sure that the wires do not fasten and break when the steering han- dle is moved upwards or into the storage position.

CONTROLS

Fit the wires and electric cable (only Multiclip 46 SE) in the cable retainer E (fig. 4). Secure the start- er handle in the eyelet F on the right-hand side of the steering handle.

BATTERY (Multiclip 46 SE)

Electrolyte in the battery is toxic and corrosive. It can cause serious corrosion damage etc. Avoid all contact with skin, eyes and clothing.

Before starting the mower the first time, you should charge the battery for 24 hours. Refer also to the section titled 'MAINTENANCE, BAT- TERY'.

USING THE MOWER

BEFORE STARTING

FILL THE CRANKCASE WITH OIL

The lawn mower is delivered without any oil in the motor crankcase. The crankcase must, therefore, be filled with oil before the motor is started the first time.

1.Remove the oil dipstick (fig. 6,7,8,9).

2.Fill the engine's crankcase with 0.6 litres of good quality oil (service class SE, SF or SG) Use SAE 30 or SAE 10W-30 oil.

3.Fill until the oil reaches the “FULL/MAX” mark on the dip stick. Do not fill with too much oil.

CHECKING THE OIL LEVEL

Check before using the machine that the oil level is between “FULL/MAX” and “ADD/MIN” on the dipstick.

Briggs & Stratton, Honda: Remove and dry the dipstick (fig. 6,7,8). Slide it down completely and tighten it. Unscrew and pull it up again. Read-off. If the oil level is low, fill with oil up to the “FULL/ MAX” mark.

Tecumseh: Clean the area round the oil plug, then remove the plug (fig. 9). If the oil is not level with the edge of the hole, carefully pour in clean oil. Re- place the oil plug.

7

Page 6
Image 6
Stiga 8211-0203-09 manual Symbols, Assembling, Using the Mower

8211-0203-09 specifications

The Stiga 8211-0203-09 is a highly regarded lawn mower in the world of garden maintenance, known for its exceptional performance and user-friendly features. Designed with both professional landscapers and passionate homeowners in mind, this lawn mower is engineered to deliver unparalleled results on a variety of terrains.

One of the most noteworthy features of the Stiga 8211-0203-09 is its powerful engine. Equipped with a high-performance, energy-efficient engine, this mower ensures reliable power for tackling even the toughest grass and terrain. Its cutting width typically spans around 38 to 45 cm, allowing for efficient mowing in larger areas while minimizing the number of passes required.

The Stiga 8211-0203-09 incorporates advanced cutting technologies to enhance mowing precision. The mower is designed with adjustable cutting heights, usually ranging from 25 mm to 75 mm, giving users the flexibility to tailor their cutting experience according to the specific conditions of their lawns. This is particularly beneficial for achieving the desired grass finish, whether a close trim is preferred or a taller fescue for a natural look.

Durability and ease of use are also key characteristics of the Stiga 8211-0203-09. The mower is constructed from high-quality materials that withstand the rigors of regular use. Furthermore, the lightweight design coupled with ergonomic handles ensures comfortable operation, reducing user fatigue during extended mowing sessions.

A noteworthy technological advancement included in the Stiga 8211-0203-09 is its innovative grass collection system. The mower features a sizable grass catcher bag that efficiently collects clippings, preventing the need for additional cleanup after mowing and promoting a healthier lawn by returning nutrients to the soil.

Additionally, the Stiga 8211-0203-09 is designed for ease of maintenance. The accessible engine compartment simplifies oil changes and technical checks, allowing users to keep their mower in optimal working condition with minimal effort.

Overall, the Stiga 8211-0203-09 combines power, versatility, and technological innovation to provide a superior mowing experience, making it an excellent choice for those looking to maintain immaculate lawns with minimal effort. Whether tackling a sprawling backyard or a commercial landscape, this lawn mower is equipped to meet and exceed expectations.