
RoadRunners | dec 2006 |
APPENDIX 2
The SI prefix is a two or three character string: ] c m where
] : SI indicator
c : Symbology Identification
m : Modifier characters (optional)
Symbology Character
ACode 39
BTelepen
CCode 128
DCode One
EEAN/UPC
FCodabar
GCode 93
HCode 11
IITF 25
KCode 16K
LPDF417
M | MSI code |
N | Anker Code |
O | Codablock |
P | Plessey Code |
R | Straight 2 of 5 (two bar start/stop |
codes) | |
S | Straight 2 of 5 (three bar start/stop |
| codes) |
T | Code 49 |
X | Other Bar code |
Z | Non Barcode data |
Modifier Characters
The modifier character is determined by summing the option values of each symbology. If the sum is greater than 9, use A, B, C, D, E , F in the place of 10, 11, 12, 13, 14 and 15.
Code 39 Option Values
0No check character or Full ASCII
1Reader has performed mod 43 check
2Reader has performed mod 43 check and stripped the check character
4Reader has performed Full ASCII conversion
Telepen Option Values
0Full ASCII mode
1Double density numeric mode
2Double density numeric followed by full ASCII
4Full ASCII followed by double density numeric
Code 128 Option Values
0Standard
1Functionposition code 1 in first character
2Functionposition code 2 in second character
Concatenation according to ISBT
4specification has been performed, and concatenated data follows.
© Baracoda 2006 | 29/29 |