RoadRunners BRR-L & BRR-LA Programming guide Nov 2007
RoadRunners BRR-L & BRR-LA Programming Guide
1/ INTRODUCTION | 3 |
2/ GENERAL CONFIGURATION | 4 |
2.1/ Reset all parameters: | 4 |
2.2/ Erase all barcodes in memory | 4 |
2.3/ Baracoda advanced features | 4 |
2.3.1/ Switch on delay | 4 |
2.3.2/ Shutdown timers | 5 |
2.3.3/ No data loss mode and Baracoda Header | 5 |
2.3.4/ Timestamp Option | 6 |
2.4/ Reading Mode | 7 |
2.5/ Operating Mode | 8 |
2.5.1/ Real time mode | 8 |
2.5.2/ Batch mode | 9 |
2.6/ Cradle / RS232 jack | 10 |
2.6.1/ Cradle | 10 |
2.6.2/ RS232 jack | 10 |
2.7/ Buzzer and Led Settings | 10 |
2.8/ Bluetooth commands | 11 |
2.8.1/ Bluetooth name | 11 |
2.8.2/ Sniff settings | 12 |
2.8.3/ Power emission settings | 12 |
2.8.4/ Security (code PIN) settings | 12 |
2.9/ Prefix and suffix | 13 |
2.9.1/ Prefix/suffix | 13 |
2.9.2/ Postrefix/postsuffix | 14 |
3/ DECODER SETTINGS | 15 |
3.1/ Symbology default settings | 15 |
3.2/ Symbology Identifier | 15 |
3.3/ Voting | 15 |
3.4/ Disable All Symbologies | 15 |
3.5/ Set decoder barcode length | 16 |
3.6/ Codabar settings | 16 |
3.7/ Code 11 Settings | 17 |
3.8/ Code 39 settings | 17 |
3.9/ Code 93 Settings | 18 |
3.10/ Code 128 Settings | 19 |
3.10.1/ General | 19 |
3.10.2/ EAN 128: Group Separator | 19 |
3.11/ Interleaved 2 of 5 Settings | 20 |
3.12/ MSI Code Settings | 20 |
3.13/ Standard 2 of 5 Settings | 21 |
3.14/ UPC/ EAN Settings | 21 |
3.15/ Set min or Max length option | 23 |
APPENDIX 1: ASCII Table | 25 |
APPENDIX 2 | 29 |
© Baracoda 2007 | 2/29 |
