Baracoda BRR-L 3/ Decoder settings, 3.1/ Symbology default settings, 3.2/ Symbology Identifier

RoadRunners BRR-L Programming guide dec 2006

3/ Decoder settings

3.1/ Symbology default settings

Sets the defaults decoder settings for all the symbologies

Set Decoder Default Settings

3.2/ Symbology Identifier

AIM Identifier will be transmitted at the beginning of the barcode. More information about the AIM Identifier available in

Appendix2

Symbology identifier - AIM - not transmitted (*)

Symbology identifier - AIM - transmitted

3.3/ Voting

Standard voting set is 2. This means that a barcode is considered read by the decoder if the same data is decoded twice. Changing this parameters will enable a stronger security on the decoding of the barcode.

Voting = 3

Voting = 2 (*)

Voting = 4

3.4/ Disable All Symbologies

Even if all symbologies are disabled, the RoadRunners will always be able to read the programming barcodes of this document.

Disable all symbologies

Enable all symbologies

© Baracoda 2006 15/29