RoadRunners
2.5/ Operating Mode
Real Time mode (standard mode): barcodes are transmitted in real time to the remote host device/terminal (with optional acknowledgment beep from the host to the scanner).
User can choose if the scanner, when not connected, should read, memorize and later automatically upload the barcodes or shouldn’t read the barcodes (no beam).
Batch mode: Barcodes are stored in the scanner even if the reader is connected to a device. In order to upload the data the user will have to read the “discharge” barcode
2.5.1/ Real time mode
Important reminder: if an ACK beep or bufferisation is needed, the scanner must be set in the “no data loss mode” first. (See part 1.2.2.)
REAL TIME mode:
Erases all codes in memory and
forces the RoadRunners in Real time mode. No other setting is changed.
REAL TIME with ACK beep and bufferisation. | REAL TIME without ACK beep and buffersiation. |
Forces the RoadRunners in Real Time mode (with | Forces the RoadRunners in Real Time mode |
data acknowledgement). Erases all codes in | (without data acknowledgement). Erases all codes |
memory. The BRR should have been previously set | in memory. The BRR should have been previously |
in the “No data loss mode” ON. | set in the “No data loss mode” ON. |
© Baracoda 2007 | 8/29 |
