Baracoda BRR-L 3.10/ Code 128 Settings 3.10.1/ General, 3.10.2/ EAN 128 Group Separator, 19/29

RoadRunners BRR-L Programming guide dec 2006

3.10/ Code 128 Settings

3.10.1/ General

Code 128/EAN 128 - not active Code 128/EAN 128 - barcode length - any length (*)

Code 128/EAN 128 – active (*)	Code 128/EAN 128 - barcode length - minimum
	length = 6

3.10.2/ EAN 128: Group Separator

‘FNC1’ included in an EAN128 code is transmitted by default as ‘GS’ (Group Separator – 0x1D). (Feature enablde for CPU firmware version > 3.00)

Enable GS transmission (*)

Disable GS transmission

It is possible to replace that ‘GS’ data to an other ASCII data. (Feature enabled for CPU firmware version > 3.00)

START

Read « define GS » label

Read intermediary label

Corresponding to the next character to set for the

replacing data of GS

NO

Finished ?

YES

Read « END of config » label

END

Define GS End of configuration

© Baracoda 2006 19/29