Baracoda BBR-LA 2.5.2/ Batch mode, RoadRunners BRR-L & BRR-LA Programming guide Nov, 9/29

RoadRunners BRR-L & BRR-LA Programming guide Nov 2007

2.5.2/ Batch mode

BATCH MODE. Forces the

RoadRunners in Batch mode.

Erases all codes in memory.

When in batch mode, The BRR will wait the appropriate command in order to start uploading the barcodes: this command can come

•from the Baracoda Manager

•from reading the “discharge” barcode here after

If this barcode is read when the reader is in batch mode and connected, the reader will automatically upload to the host all the data in its memory. If not in batch mode and not connected, the BRR-L will ignore this barcode.

ÆFor CPU firmware versions <3.16, only the following upload barcode is available: Upload batch data

When scanning this barcode, the BRR will send all barcodes in memory using the Baracoda header, with “no data loss mode” OFF.

ÆFor CPU firmware versions ≥3.16, this upload barcode is available: Upload batch data with no data loss mode

This upload process consists in switching temporarily the BRR into Real time with “no data loss mode” ON (all the barcodes in memory will be sent using the no data loss protocol). Then the BRR switches back to batch mode when all the barcodes are properly sent.

© Baracoda 2007 9/29