Baracoda BBR-LA 2.6/ Cradle / RS232 jack 2.6.1/ Cradle, 2.6.2/ RS232 jack, Parameters are, 10/29

RoadRunners BRR-L & BRR-LA Programming guide Nov 2007

2.6/ Cradle / RS232 jack

2.6.1/ Cradle

By default, the scanner Bluetooth is always ON. (It wasn’t the case for CPU version < 3.00) Disable dock UART (*)

2.6.2/ RS232 jack

To communicate with the scanner through the RS232 cable instead of Bluetooth way, you have to scan this barcode.

Enable Dock UART	Parameters are :
	Baud rate : 115200
	Parity : none
	Data bits : 8
	Stop bit : 1

Note : When the RS232 cable is not connected, it is possible to communicate with the scanner over Bluetooth.

2.7/ Buzzer and Led Settings

You can use these options to enable or disable the buzzer and / or the Led. You can also invert the led position. LED ON (*)

LED OFF

LED CONFIG : default (*)

LED CONFIG : inverted

Good read beep on (*)

Good read beep off

ACK beep on (*)

ACK beep off

Beep level volume = HIGH (*)

Beep level Volume = LOW

© Baracoda 2007 10/29