Stinger JPEG 2000 user manual External Device, TCP/IP Setup, IP Config Setup, Connection Setup

Setup

5-6. External Device

To set parameters of external devices connected to the DVR, like Ethernet, PTZ camera, RS-232C, etc.

Use the direction buttons to move to the sub-menu and Press the [ENTER] button to select.

5-6.1. TCP/IP Setup

TCP/IP function enables user to see live pictures and recorded pictures via the internet.

1. IP CONFIG Setup:

Show the network information assigned to the DVR unit. If the DHCP setup status is AUTOMATIC, user can set the IP port only and if the DHCP setup status is MANUAL, user must set all parameters.

2. Connection Setup:

TIME OUT: Adjust TIMEOUT value properly to successfully access to DVRX unit via an TCP/IP connection. If data transmission speed is high enough, leave TIMEOUT value as set by manufacturer (200 msec), and increase it if data transmission via TCP/IP GPRS connection is relatively slow. Execute tracert (Tracing Route) in your PC for IP assigned to DVRX unit, and you can figure out how much to increase the TIMEOUT value by.

RETRY COUNT: Set the retry number of times for network connection.