5-6.2. RS-232C Setup
User can control the DVR via RS-232C port. Connect DVR to PC via RS-232C port and control DVR using keyboard of PC. This function is mainly for programmers who wants to control the DVR as part of many devices connected to PC network.
5-6.3. PAN/TILT Setup
It is to set parameters for PTZ cameras connected to the DVRX unit. The DVR unit already includes all the protocols of many well-known PTZ cameras such as PELCO D-type. After the user has selected the correct MODEL and set the parameters to control his PTZ cameras, he can control them using the operation buttons on the keyboard of the DVRX. If the PTZ camera protocols are not available in the PTZ list, the user must input the parameters of the PTZ protocol himself. Using the USB firmware port, the user can upgrade protocol for new PTZ cameras as they become available.
1.CHANNEL: Select channel
2.MODEL: Select camera model (protocol type) per each channel
3.PTZ ID: Select ID
4.BAUDRATE: Select data transmission speed
5.CMD DELAY: Select command delay time
