SECTION 3
INITIAL
3.1OPERATOR'S SAFETY PRECAUTIONS SAFE OPERATION IS NOT AN ACCIDENT; Observe these rules:
A.Know the freezer. Read and understand the Operating Instructions.
B.Notice all warning labels on the freezer.
C.Wear proper clothing. Avoid loose fitting garments, and remove watches, rings or jewelry which could cause a serious accident.
D.Maintain a clean work area. Avoid accidents by cleaning up the area and keeping it clean.
E.Stay alert at all times. Know which switch, push button or control you are about to use and what effect it is going to have.
F.Disconnect electrical cord for maintenance. Never attempt to repair or perform maintenance on the freezer until the main electrical power has been disconnected.
G.Do not operate under unsafe operating condi tions. Never operate the freezer if unusual or exces sive noise or vibration occurs.
Dispense Rate Adjuster
3.2OPERATION CONTROLS AND INDICATORS Before operating the freezer, it is required that the operator know the function of each operating control. Refer to Figure 9 and 10 for the location of the operating controls on the freezer. Additional information on the IntelliTech control, including consistency adjustment can be found in Section 4.
WARNING
High voltage will shock, burn or cause death. The
A.SPIGOT SWITCH
The SPIGOT switch will automatically actuate the auger drive and refrigeration systems when the spigot is opened to dispense product. When the spigot is closed, the drive motor and compressor will remain "on" until the product in the barrel reaches the proper consistency.
Freezing Cylinder
IntelliTec Control
(See Figure 10)
Figure 9. Controls
7