Appendix D - Optional Accessories

25

 

 

Drive Cover

1

Slip Drive Cover

1

 

 

Lip into Top Rear

 

 

of Carrier. The

 

3 Slide Drive Cover

 

Sides of the Cover

 

 

 

Forward Making Certain

 

Will Fit Between

 

 

 

Front Cover Lip is Inside

 

the Drive and the

 

 

 

Carrier. Fasten Screws.

 

Carrier. Mounting

 

 

 

 

 

Holes Must be

2

Drive

 

Towards Rear of

 

Cover

 

Carrier.

 

 

 

 

2

Swing Drive Cover

 

3

 

Down, Covering

 

Mounting

 

the Drive. Make

 

 

 

Holes

 

Certain You Do

 

 

Not Damage

 

 

 

Connector Pins or

 

 

 

Cables.

 

Disk

 

 

 

Carrier

0067

Full Drive Cover (optional)

Figure D-2: Full Drive Cover

The full drive cover (P/N DX100-COV) is an attractive metal cover which can provide additional protection to the drive, preventing foreign material from coming in contact with the drive and cables. The full drive cover is similar to the cable cover provided with the DE100i-SW and DE100i-SWC except the full drive cover protects the drive as well as the cables. It is easily installed with two (2) #6-32 Phillips Flat Hd. screws as shown in the illustration above.

NOTE: The drive cover may not be compatible with all 3.5" half-height drives. Exact drive height and fit within the DE100i-SW and DE100i-SWC frame can vary between drive manufacturers. Please contact StorCase for technical assistance before ordering the drive cover.

DE100i-SW/SWC User's Guide - Rev. G01

StorCase Technology, Inc.