Stovax 705088 manual User Instructions, AR1611, AR1612, AR1613, AR1614, AR1615, AR1616

USER INSTRUCTIONS

7.2Place log B on the left-hand side of the burner with the location bar on the underside of the log fully located in the long slot of the burner. Make sure the log is as far to the left as possible. See diagram 4.

4

AR1611

7.3Place log C on the right-hand side of the burner with the location bar on the underside of the log fully located in the long slot in the burner. Make sure the log is as far right as possible. See diagram 5.

5

AR1612

7.4Place log D across from the rear log A to log B on the left- hand side. There are cut-outs in both logs for location. See diagram 6.

6

AR1613

7.5There are two ash panels which lay across the front of the burner skin. Place the panel with the flat edge facing the left side of the firebox. There are location holes on this log which fit over the screw holes of the burner skin.

7

AR1614

7.6Place the second ash panel to the right of the first, with the pointed end of the panel fitting into the V shape. This panel should locate on the screw holes of the burner skin. Ensure that both logs are horizontal to the burner ports.

8

AR1615

7.7Place log E across from the rear of log A to log C on the right-hand side. Again, there are cut-outs for location. The front of the log should sit on the front ash panels and should fit tight to log C. See diagram 9.

9

AR1616

6