INSTALLATION INSTRUCTIONS

SITE REQUIREMENTS

1.FLUE AND CHIMNEY REQUIREMENTS

1.1The chimney or flue system must comply with the rules in force and must be a minimum of 127mm in diameter. (5").

1.2The minimum effect height of the flue or chimney must be 3 metres (10ft). Any horizontal flue run from the rear outlet should not exceed 100mm from the back of the appliance.

1.3The chimney or flue must be free from any obstruction. Any damper plates should be removed or secured in the fully open position and no restrictor plates should be fitted.

1.4The chimney should be swept prior to the installation of the appliance. However, where it can be seen that the chimney is clean and unobstructed throughout its entire length, it need not be swept.

NOTE: If it is intended to fit the stove into a existing brick built chimney without a closure plate, a 5" (127mm) liner must be used. Larger lined flues may work, but in some instances could cause cold start flue problems resulting in nuisance shutdown. Lined flues above 7" (175mm) are not recommended.

Due to recent changes to European chimney standards, new flues and chimneys are now described by their temperature, pressure and resistance to corrosion, condensation and fire. To assist in identifying the correct flue system, the minimum flue specification is shown in the technical specification of this book. Existing chimneys are not covered by this system.

NOTE: THIS APPLIANCE IS NOT APPROVED FOR CLOSURE PLATE INSTALLATIONS

2.VENTILATION

2.1Consult the rules in force.

NOTE: This appliance does not normally require any additional ventilation when installed in G.B.

3.INSTALLATION OF THE GAS SUPPLY

3.1Before installation, ensure that the local distribution conditions (identification of the type of gas and pressure) and the adjustment of the appliance are compatible.

3.2Ensure that the gas supply is capable of delivering the required amount of gas and is in accordance with the rules in force.

3.3Soft copper tubing and soft soldered joints can be used but must not be closer than 50mm to the base of the tray.

3.4A means of isolating the gas supply to the appliance must be provided independent of any appliance control.

3.5All supply gas pipes must be purged of any debris that may have entered prior to connection to the appliance.

4.APPLIANCE LOCATION

4.1This fire must stand on a non-combustible hearth that is at least 12mm thick and projects 50mm minimum from the base of the fire in all directions.

4.2Do not install in a room that contains a bath or shower.

1

AR0604

MINIMUM CLEARANCE

4.3The fire is not suitable for installation against a combustible wall. All combustible materials must be removed from behind the fire.

4.4Ensure you comply with all minimum clearance measurements, whether or not to combustible materials.

2

AR0531a

*

* Air-space to non-combustible

AR0531b

The above dimensions provide adequate clearance at the side and rear of the fire so that the controls can be reached.

9

Page 8 Page 10
Page 9
Image 9
Stovax 705088 manual Site Requirements, Flue and Chimney Requirements, Installation of the GAS Supply, Appliance Location
Page 8 Page 10

705088 specifications

Stovax 705088 is a prominent model in the realm of wood-burning stoves, recognized for its blend of modern technology and traditional aesthetics. This stove is engineered to provide efficient heating while showcasing a classic design that can complement various home interiors.

One of the primary features of the Stovax 705088 is its robust build quality, constructed from high-grade cast iron and steel. This ensures durability, allowing the stove to withstand high temperatures while providing efficient heat output. The stove features a large glass window that offers an unobstructed view of the flames, creating a warm and inviting atmosphere in any living space.

The Stovax 705088 utilizes advanced combustion technology that optimizes fuel efficiency. This technology enhances the burning process, ensuring that wood is combusted thoroughly to release maximum heat with minimal emissions. It also incorporates a clean burn system that reduces smoke production, making it an environmentally friendly option for those concerned about air quality.

Another notable characteristic is its versatility in fuel types. While primarily designed for wood burning, the Stovax 705088 can also accommodate smokeless fuels, providing homeowners with flexibility depending on their fuel availability and preferences. This adaptability not only enhances its usability but also ensures that it meets the various requirements of different regulatory zones.

The stove’s efficiency rating is particularly impressive, achieving high outputs that maximize heat generation relative to fuel consumption. This efficient energy use translates into lower heating costs, making it a practical choice for economically-minded consumers.

In terms of installation, the Stovax 705088 is designed with ease-of-use in mind. Its compact size and straight lines allow it to fit seamlessly into various spaces, whether in a traditional cottage or a modern home. Furthermore, it can be installed as a freestanding unit or as part of a fireplace insert, facilitating additional design flexibility.

In summary, the Stovax 705088 stands out in the wood-burning stove market for its sturdy construction, high efficiency, and elegant design. Its combination of advanced combustion technology and user-friendly features provides a reliable heating solution while enhancing the aesthetic appeal of any room. Whether you are looking for warmth, style, or eco-conscious performance, the Stovax 705088 is a commendable choice.
Top Page Image Contents