SERVICING INSTRUCTIONS

REPLACING PARTS

1.GENERAL

1.1All principal components can be replaced without removing the stove from its installation, although it is essential that the gas supply to the appliance is turned off at the isolation device before proceeding further.

2.MAIN BURNER

2.1Turn the gas supply off at the isolation device, remove the door and place to one side, carefully remove the ceramic fuel bed components.

2.2Remove the three securing screws, two at the rear and one at the front left-hand side. See diagram 1. Raise the left- hand side of the burner to clear the bracket, draw the left- hand side forward. The burner venturi is engaged over the injector. When removing the burner be sure to clear the injector, this will release the right-hand side of the burner. Take care when removing the burner so as not to damage the pilot burner.

1

AR1605

2.3To replace the burner, engage the venturi over the injector ensuring the burner sits on top of the fixing bracket. Push the burner to the right and whilst holding, insert the three fixing screws.

NOTE: BEFORE REPLACING THE BURNER, ENSURE THE SILICONE SEAL AROUND THE INJECTOR IS INTACT AND CHECK THAT VENTURI COVER IS ATTACHED.

3.PILOT UNIT

3.1The pilot assembly consists of four components that can be individually changed, these are:

1)Pilot burner bracket

2)Pilot injector

3)Electrode

4)Thermocouple

3.2Turn the gas supply off at the isolation device. Remove the door and place to one side and carefully remove the

ceramic fuelbed components.

3.3Remove the main burner. See Section 2 above.

3.4Remove the two fixing screws from the pilot bracket. See Diagram 2. Gently draw the assembly away from the firebox to give access to the nuts and ignition lead.

2

AR0614

3.5To remove the pilot injector, undo the compression nut on the pilot feed pipe and withdraw the injector which will be hooked onto the olive. When replacing an injector always make sure it is hooked onto the olive before inserting it into the pilot burner. See diagram 3.

3

AR1604

3.6To remove the electrode, disconnect the ignition lead and undo the retaining nut. The electrode can now be removed. Note the orientation of the electrode terminal when reassembling. See diagram 4.

4

AR0616

17

Page 16 Page 18
Page 17
Image 17
Stovax 705088 manual Replacing Parts, Main Burner, Pilot Unit
Page 16 Page 18

705088 specifications

Stovax 705088 is a prominent model in the realm of wood-burning stoves, recognized for its blend of modern technology and traditional aesthetics. This stove is engineered to provide efficient heating while showcasing a classic design that can complement various home interiors.

One of the primary features of the Stovax 705088 is its robust build quality, constructed from high-grade cast iron and steel. This ensures durability, allowing the stove to withstand high temperatures while providing efficient heat output. The stove features a large glass window that offers an unobstructed view of the flames, creating a warm and inviting atmosphere in any living space.

The Stovax 705088 utilizes advanced combustion technology that optimizes fuel efficiency. This technology enhances the burning process, ensuring that wood is combusted thoroughly to release maximum heat with minimal emissions. It also incorporates a clean burn system that reduces smoke production, making it an environmentally friendly option for those concerned about air quality.

Another notable characteristic is its versatility in fuel types. While primarily designed for wood burning, the Stovax 705088 can also accommodate smokeless fuels, providing homeowners with flexibility depending on their fuel availability and preferences. This adaptability not only enhances its usability but also ensures that it meets the various requirements of different regulatory zones.

The stove’s efficiency rating is particularly impressive, achieving high outputs that maximize heat generation relative to fuel consumption. This efficient energy use translates into lower heating costs, making it a practical choice for economically-minded consumers.

In terms of installation, the Stovax 705088 is designed with ease-of-use in mind. Its compact size and straight lines allow it to fit seamlessly into various spaces, whether in a traditional cottage or a modern home. Furthermore, it can be installed as a freestanding unit or as part of a fireplace insert, facilitating additional design flexibility.

In summary, the Stovax 705088 stands out in the wood-burning stove market for its sturdy construction, high efficiency, and elegant design. Its combination of advanced combustion technology and user-friendly features provides a reliable heating solution while enhancing the aesthetic appeal of any room. Whether you are looking for warmth, style, or eco-conscious performance, the Stovax 705088 is a commendable choice.
Top Page Image Contents