![5.Running The appliance](/images/new-backgrounds/38462/3846213x1.webp)
USER INSTRUCTIONS
PR8004
•Close the door if desired.
•Use a sparkguard if running with the doors open
5.Running The appliance
5.1Burning Wood:
•Close the Primary air control
PR8005
•Wood burns best on a bed of ash
•Rake the embers evenly over the fire bed and open the
Airwash control fully for a few minutes before
4.2Burn new logs at high output for a few minutes before adjusting the Airwash control. Refuel little and often for clean, efficient burning.
4.3Experience establishes settings to suit personal preferences.
4.4Do not burn large amounts of fuel with the Airwash control closed for long periods of time. This reduces the glass cleaning effect and causes tars and creosotes to
4.5When in use, burning the appliance at high output for a short period also reduces tars and creosote.
5.2Burning Solid fuel:
To burn solid fuel efficiently in a wood version the multi- fuel kit should be fitted.
| Appliance | Part No. |
|
| |
Stockton 5 (all) | 7108 | |
|
|
|
Stockton 6 | (all) | 7117 |
Stockton 7 |
| 7109 |
Stockton 8 |
| 7111 |
|
|
|
Stockton 8 | Slimline | 7111SL |
|
|
|
Only for use with recommended fuels, see Installation Section for full fitting details.
• Set air controls, See Diagram 10
PR8006
5.2
•Open the Primary air control fully to establish a glowing bed before adding new fuel
•Burn new fuel at high output for a few minutes before adjusting the Primary air control to the desired setting
•Refuel little and often for clean, efficient burning.
5.3Experience establishes control settings to suit personal preferences
5.4Do not burn large amounts of fuel with the Primary Air Control on low settings for long periods of time. This reduces the glass cleaning effect of the airwash and causes tars and creosotes to
7