INSTALLATION INSTRUCTIONS
Flue Pipe 915mm (3ft)
Size | Stovax Part No. |
*5" | 4502 |
|
|
6" | 4602 |
|
|
Self tapping screw at rear
Seal flue collar with Fire Cement
PR7196
Seal Collar with Fire Cement
Self Tapping Screw
|
| Tee |
|
|
|
| Size | Stovax Part No. |
|
|
|
| 5" | 4516* |
|
|
|
| 6" | 4616 |
|
|
|
Cap
PR7218
To chimney connection
600mm min
1000mm max unsupported
To chimney connection as detailed in building regulations
Elbow with access cover
Size Stovax Part No.
5" 4512
|
| 6" | 4612 |
|
| ||
|
| 7" | 4712 |
|
|
|
|
|
| Flue Pipe 915mm (3ft) | |
|
| Size | Stovax Part No. |
|
| 5" | 4502* |
|
| 6" | 4602 |
|
| 7" | 4702 |
|
|
|
|
600mm min
1000mm max unsupported
as detailed in building regulations
Elbow with access cover
|
| Size | Stovax Part No. |
|
| 5" | 4512 |
|
| 6" | 4612 |
|
| ||
|
|
|
|
|
| 7" | 4712 |
|
|
|
|
|
| Flue Pipe 915mm (3ft) | |
|
| Size | Stovax Part No. |
|
| 5" | 4502* |
|
| 6" | 4602 |
|
|
|
|
|
| 7" | 4702 |
|
|
|
|
PR7195
PR7193
2. REMOVAL OF THE LOG GUARD |
1.3Rear flue pipe installation
• Insert a tee into the flue collar
The tee piece is used as cleaning access.
• Lift appliance into position
Take care not to damage the hearth finish.
•Level using adjustable bolts, see picture 1
•Connect tee to the chimney using flue pipe
•Secure with self tapping screw
•Seal the connecting joints
Do not use a 90˚ elbow to make this connection
The Flue must be installed in accordance with manufacturers instructions.
2.1 To remove the Log guard: |
• Lift Log Guard clear of the supporting brackets |
• Rotate to clear the sides of the door opening. |
Do not use appliance without the log guard in position.
3.FITTING AND REMOVAL OF THE FIREBRICKS
3.1Remove the firebricks as part of the routine maintenance. This can be carried out without the use of tools.
3.2Allow the appliance to cool fully before removing firebricks.
3.3Take care when handling, as bricks can become fragile after use. Life span depends on the type of fuels burnt and the level of use.
•Replace damaged bricks as soon as possible
3.4If your stove is fitted with 4 upper firebricks:
•Remove the lower 2 bricks first
•Remove the top bricks from the support rails
21