INSTALLATION INSTRUCTIONS
INSTALLATION
4.6Check the gas connections to the fire are sound. Light the fire and check all joints on the appliance.
4.7Check the appliance running pressure is correct. See databadge.
4.8Fit the fret to the fire front using two screws. See Diagram 4.
4
AR0311
5.INSTALLATION - CONVECTOR FIRES
5.1Make any necessary alterations to fireplace opening. Ensure that the lintel does not obstruct the flue outlet into the flue, and that there is a clear space for debris of at least 90mm. See Diagram 5.
5
AR0300
5.2Gas pipe entry must be through one of the holes in the rear of the convector box. See Diagram 6 & 7.
6
AR0200
Note: Gas pipes passing through masonry must be protected.
5.3If the isolation tap is to be fitted under the fire, the GAZCO GC0060 provides a neat and easy solution. See Diagram 7A.
77A
AR0306/7
5.4Remove the fire assembly (see Diagram 9), and offer the convector box into the opening, checking that it fits squarely. Mark the fixing holes and the gas pipe entry positions. See Diagram 8.
8
AR0313
5.5Fit the gas pipe into position, ready for passing into the convector box, ensuring enough remains to connect to the fire.
13
