Stovax 8455 manual Installation Instructions, 16” AND REDUCED DRAUGHT COAL LAYOUT

INSTALLATION INSTRUCTIONS

INSTALLATION

NOTE: CERAMIC PARTS ARE FRAGILE.

6.1Position the flame baffle on the rear of the tray. See Diagram 13 arrow B.

6.2Position the front coal, make sure it sits flat onto the burner skin. See Diagram 13 arrow C.

13

AR2190

6.3Place the coals following the appropriate Diagrams and Instructions:

16” AND REDUCED DRAUGHT COAL LAYOUT

6.4Curved fronts (Holyrood and Richmond)-place 5 large coals onto the front coal moulding ensuing that they rest against the front Place 2 small coals on to the front coal, 1 at each end.

See Diagram 14.

14

AR1115

6.5Flat fronts (All others) - Place 3 large coals and 4 small coals onto the front coal moulding ensuring that they rest against the decorative front, these should run intermittently small, large, small etc. See Diagram 15.

15

AR1116

6.6Place 5 large coals onto the flame baffle fingers. See Diagram 16.

16

AR1117

6.7Place 4 large coals so that they form a bridge between the other 2 rows, and 2 small coals, 1 at each end. Place 4 large coals at the back of the fire. See Diagram 17.

17

AR1118

6.8Place the remaining 4 small coals on top of the others so that they form a bridge between the second and third rows. See Diagram 18.

18

AR1119

15