MAINTENANCE and SERVICING

For a complete list of spare parts and accessories contact your Stovax dealer for the

Stovax Fireplace, Stove & Hearth Accessories brochure or call 01392 474011

1.ANNUAL SERVICE

1.1Before the start of the heating season strip, inspect and clean the appliance as detailed:

Allow appliance to cool

Remove all of the following internal parts; damper system, complete log box/multi-fuel box/cast basket

Remove any frames, Installation Section 3

Sweep the appliance at this point if it is required

Vacuum clean any remaining ash and debris from the inside of the appliance

Stovax offer a filter/collection attachment for your vacuum cleaner to protect it from fire ash. Ash Clean (Stovax Part No. 2091).

Clean the internal surfaces of the appliance using a wire brush and scraper as required

Vacuum and brush the resulting debris from the appliance.

Clean the grate parts with a wire brush, and check the parts for any damage

Replace any damaged parts

Re-fit cleaned internal parts

Lightly oil any operating mechanisms

To refresh painted finishes use Stovax Thermolac paint.

1.2Use genuine Stovax replacement parts to keep your appliance in safe and efficient working order. Your local Stovax dealer can provide you with the parts you require.

This is a list of the maintenance products you may need to use

Task

Product name

Stovax Code

Number

 

 

Preventing build-

Protector (15 sachets)

7002

up of creosote in

 

 

Protector (1kg tub)

7025

flue

 

 

 

Sealing flue pipe

Fire Cement (500g tub)

2020

 

 

joints

Fire Cement (600g cartridge)

2021

 

 

 

 

 

Thermolac Black

2019

 

(400ml aerosol)

Re-painting

 

Thermolac Black

2057

 

 

(200ml brush-on)

 

 

Cleaning matt

Colloidal black (85ml)

7000

black Appliances

 

 

Protecting your

Heat resistant leather gloves

4008

hands

 

 

Ash Clean

Vacuum Cleaner Attachment

2091

 

 

 

These products, available from your local Stovax dealer, along with regular maintenance and use of correct fuels, will keep your appliance in the best possible condition.

1.3If you require more information about Stovax group products visit our web site www.stovax.com

1.4Using the appliance for the first time:

Burn at a low output for the first day of use This allows the seals and paint to fully cure.

1.5During this time the appliance may give off some unpleasant odours:

Keep the room well ventilated to avoid a build-up of fumes.

1.6Your Stovax dealer can carry out service and maintenance.

2.FITTING AND REMOVAL OF  FLUE DAMPER

2.1See Section 6 Fitting & Removal of Flue Damper in Installation section.

28

Page 28
Image 28
Stovax Open Log Burning Convector Fireboxes manual Annual Service