Stovax 7016, 7027, 7017 FITTING & REMOVAL OF the baffle, Removal Of The Log Guard, SIDES - 1 REAR

Models: 7017 7027 7016 sheraton free standing stove

1 28
Download 28 pages 40.81 Kb
Page 16
Image 16
4. FITTING & REMOVAL OF the baffle

INSTALLATION INSTRUCTIONS

1.9Connect a straight piece of flue pipe by inserting it into the flue spigot and seal using fire cement and secure with a suitable self tapping screw.

4. FITTING & REMOVAL OF the baffle

4.1 To maintain safe and efficient combustion the stove is fitted

600mm min

1000mm max unsupported

2.REMOVAL OF THE LOG GUARDTo chimney connection as detailed in building 3.FITTING & REMOVAL OF FIREBRICKS regulations

Elbow with access cover

Size Stovax Part No.

6" 4612

Flue Pipe 915mm (3ft)

Size Stovax Part No.

6" 4602

 

with a baffle in the top of the firebox.

4.2

Allow the stove to cool fully before removing baffle system.

4.3

Remove baffle support from front edge of baffle.

4.4

Slide right hand firebrick towards front of the stove. Lift up

 

towards the centre and ease out.

4.5

Repeat the procedure with the left hand brick.

4.6

Replace baffles, starting with the upper left. Ease the upper

 

right hand baffle into position by reversing the procedure

 

above.

PR7220S

2.REMOVAL OF THE LOG GUARD

2.1Remove the log guard by lifting clear of the supporting brackets and rotating to clear the sides of the door opening. The stove should not be used without the log guard in position.

3.FITTING & REMOVAL OF FIREBRICKS

(2 SIDES - 1 REAR)

3.1As part of the routine maintenance of the stove you may have to remove the firebricks from the stove. This can be carried out without the use of tools.

3.2Allow the stove to cool fully before removing firebricks.

3.3Care should be taken when handling bricks, as they can become fragile after a period of use. This is normal and the life will depend on the type of fuels burnt and the level of use.

3.4Damaged bricks should be replaced as soon as possible.

3.5To remove the firebricks first remove the side bricks and then slide the rear bricks forward and then remove these.

3.6Care should be taken when handling bricks, as they can become fragile after a period of use. This is normal and the life will depend on the type of fuels burnt and the level of use.

4.7 Replace both side firebricks and slide back into original

positions.

16

Page 16
Image 16
Stovax 7016 FITTING & REMOVAL OF the baffle, Removal Of The Log Guard, Fitting & Removal Of Firebricks, SIDES - 1 REAR