Stow SCT Seriestrowel Specifications Trowel, Model SCT36 SCT46, See Table, SideView Top View

SCT SERIESTROWEL — SPECIFICATIONS (TROWEL)

SideView

Top View

Figure 2. SCT SERIESTrowel Dimensions

Table 1. STOW Trowel Specifications

MODEL	SCT36	SCT46
A– Height (Lifting Hook)	36.7 in. (931.6 mm)	34.5 in. (876.2 mm)
B– Height Engagement Lever)	41.4 in. (1,044.2 mm)	41.1 in. (1,044.2 mm)
C–Width	36.5 in. (927.1 mm)	46.0 in. (1,168.4 mm)
D–Length	70.5 in. (1,789.4 mm)	75.2 in. (1,910.1 mm)
Weight – Operating	SEE TABLE 3
Sound Pressure1	94 db	97 db
Vibration2	2.0g (19.6 m/s2)	2.5g (24.5 m/s2)
Ring Diameter	36.5 in. (92.7 cm)	46 in. (117 cm)
Number of Blades	4	4
Blade Tip Speed – FPM (m/s)	1,290 fpm (6.5 m/s)	1,290 fpm (6.5 m/s)
Rotor – RPM (Gasoline)	144 @ 3800 rpm	144 @ 3800 rpm
Path Width – in. (cm)	36 in. (91.44 cm)	46 in. (116.84)

NOTE:

1.Sound pressure is a weighted measure. Measured at the operators ear position while the walk-behind trowel is operating at full throttle on concrete in a manner most often experienced in “normal” circumstances. Sound pressure may vary depending upon the condition of the concrete. Hearing protection is always recommended.

2.The vibration level indicated is the maximum RMS (Root Mean Square) value obtained at the handle grip while operating the walk-behind trowel on curing concrete in a manner most often experienced in “normal” circumstances. Values were obtained from all three axes of motion. The values shown represent the maximum RMS value from these measurements.

SCT SERIES WALK-BEHIND TROWEL — PARTS & OPERATION MANUAL — REV. #4 (04/02/07) — PAGE 13