Stow SHS62A CUT-OFF SAW Maintenance, V-belt should remain in tension, Tensioning position

SHS62A CUT-OFF SAW — MAINTENANCE

V-Belt Changing Procedure (continued)

Re-tension the V-belt by turning the belt tensioning cam		.
The V-belt should remain in tension.
Fully tighten the three nuts	that lock the V-belt into the proper
tensioning position.

Figure 18. Reversing the Cutting Arm

Re-install the guard	and V-belt	covers. Fully tighten
the two cap screws	and reinstall the adjustment knob		.

N

Figure 19. Re-Installing Cover Guard

PAGE 22 — SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06)