Stow SHS62A manual Cam .The V-belt should remain in tension, Re-attach the cover guard

SHS62A CUT-OFF SAW — MAINTENANCE

Reversing the Cutting Arm Procedure (continued)

Reverse the cutting arm 180 degrees as shown in the Figure 23, and re-tension the V-belt by turning the belt tensioning

cam .The V-belt should remain in tension.

Fully tighten the three nuts	that lock the V-belt into the proper
tensioning position.

Figure 23. Reversing the Cutting Arm

Re-attach the cover guard	with the 2 cap screws		,
and reconnect the guard adjustment knob		.

Figure 24. Re-attaching Cover Guard

PAGE 24 — SHS62A CUT-OFF SAW — OPERATION & PARTS MANUAL — REV. #0 (06/02/06)