Stow manual STR36SP-SERIES Operation and Safety Decals, Machine Safety Decals

STR36SP-SERIES — OPERATION AND SAFETY DECALS

Machine Safety Decals

The STR36SP-SERIES Ride-On Power Trowel is equipped with a number of operation and safety decals. These decals are provided for operator safety and maintenance information. Should any of these decals become unreadable, replacements can be obtained from your dealer.

WARNING
To avoid injury,
you MUST read
and understand
operator’s manual
before using this
machine.
This machine to
be operated by
qualified
personnel only.
Ask for training
as needed.
P/N 35137
P/N 35137	P/N 11111 11” x 3”
P/N TBD	P/N: 21455
	WARNING
P/N 2814 (WHITE)
	P/N 36099 (ISO Blue)
	ROTATING BLADE
	HAZARD
	Keep hands
	and feet clear
	of guard rings.
MODEL	Stop engine
SERIAL NO.
	before servicing.
	P/N 35168

CONTACT	P/N 35168
SERVICE
DEPARTMENT

P/N 20953

BELT DRIVE CLOCKWISE

GEAR DRIVE GEAR DRIVE

CHECK	CHECK
	COUNTER
HOT	CLOCKWISE

LIFTING POINT LIFTING POINT

LUBRICATION LUBRICATION

LUBRICATION LUBRICATION

DANGER

DO NOT DISASSEMBLE

SPRING INSIDE IS

UNDER COMPRESSION

2634

P/N 2634

Engine exhaust and some of its constituents, and some dust created by power sanding, sawing, grinding, drillingandotherconstructionactivities contains chemicals known to the State of California to cause cancer, birth defects and other reproductive harm. Some examples of these chemicals are:

Leadfromlead-basedpaints.

Crystallinesilicafrombricks.

Cementandothermasonryproducts.

Arsenicandchromiumfromchemically

treatedlumber.

Your risk from these exposures varies, dependingonhowoftenyoudothistype of work. To reduce your exposure to these chemicals: ALWAYS work in a well ventilated area, and work with approved safety equipment, such as dust masks that are specially designed to filter out microscopic particles.

P/N 20525

			DECAL
HIGH E			SPEED
	N	G
			I
			N	E
				S	P
						E
							E	D
								LO

P/N 11811

ENGINE PLATE

W

P/N: 11246

P/N: 13118

STR36SP-SERIES • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #1 (09/16/11) — PAGE 14