Sub-Zero BI-36F, BI-48SD, BI-42UFD, BI-36UFD, BI-36UG, BI-42SD, BI-36RG manual Custom Panels

BUILT-IN REFRIGERATION

Custom Panels

For framed, overlay and flush inset applications, custom door panels must be provided. Handle hardware must also be provided for overlay and flush inset applications. Refer to panel requirements below and the charts on pages 20–25 for custom panel dimensions for your specific design application.

IMPORTANT NOTE: Do not cover a glass door with a solid panel.

Finish all sides of the custom panels. They may be visible when the door is open or through the window of glass door models.

PANEL REQUIREMENTS

PANEL WEIGHT	MAX
BI-36R, BI-36RG, BI-36F	75 lb (34 kg)
All Other Models	50 lb (23 kg)
Grille Panel	13 lb (6 kg)

FRAMED PANELS

The framed application is an overlay model with framed design features. It is not a separate model.

If the custom panel is thinner than 1/4" (6), a filler material must be added to achieve a proper fit. If the panel is thicker than 1/4" (6), rout an edge around the panel or mount the custom panel on a sheet of 1/4" (6) thick material and insert into the channel. Refer to the illustrations below.

Routing, recessing or optional extended handles may be required for finger clearance. Refer to the full-scale template on page 32.

When installing two units side by side, refer to page 14 for dual standard installations.

PANEL THICKNESS	MIN
Framed	1/4" (6)
Overlay and Flush Inset	5/8" (16)

1/4" (6) TRIM REVEAL

1/4" (6) PANEL

DOOR

Panel 1/4" thick or less.

1/4" (6) min

ROUT TO 1/4" (6)

DOOR

Panel thicker than 1/4".

subzero.com/specs 17