Sub-Zero BI-48SD manual Custom Panels, Partial Framed Panel, Panel assembly cross section, overlay

BUILT-IN REFRIGERATION

Custom Panels

PARTIAL FRAMED OPTION

The partial framed kit includes a stainless steel panel for above and below the external dispenser. Refer to the chart below for panel width. The kit is available­ through an autho- rized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.

PARTIAL FRAMED PANEL

MODEL	WIDTH
BI-42SD	151/16" (383)
BI-48SD	183/4" (476)

PANEL MOUNTING KIT

A Sub-Zero custom panel mounting kit eliminates the need for a backer and spacer panel and is available­ through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. The kit consists of mounting cleats, screws and gages used to properly position the cleats. The kit is available for all built-in models except glass door models. Dual installations require two mounting kits.

OVERLAY PANELS

Overlay panels are typically created by combining a 3/4" (19) custom panel, a .10" (3) spacer panel and a 1/4" (6) backer panel. Refer to the illustrations below.

When installing two units side by side, refer to page 14 for dual standard installations.

SPACER PANEL

CUSTOM PANEL

BACKER PANEL

TRIM

5/16" (8) min

1/8" (3) (OVERLAY)

CUSTOM		SPACER
PANEL		PANEL
		BACKER
		PANEL
3/4"	.10" (3) 1/4" (6)
(19)
typical

Panel assembly cross section	Panel assembly rear view.
(overlay).

18 Sub-Zero Customer Care 800.222.7820