Manuals / Sub-Zero / Kitchen Appliance / Freezer

Sub-Zero BI-30U, BI-36R, BI-36U, BI-36F, BI-48SD, BI-42UFD Dual Installation, Without Filler Strip

Models: BI-30U BI-30UG BI-36S BI-36RG BI-42SD BI-36UG BI-36UFD BI-42S BI-42UFD BI-48SD BI-48S BI-36F BI-36U BI-36R

1 40
Download 40 pages 43.37 Kb
Page 27
Image 27
Dual Installation

BUILT-IN REFRIGERATION

Dual Installation

If two units are installed side by side, a dual installation kit may be required. Installations without a custom filler strip require a dual installation kit. If a dual installation kit is not specified, a 2" (51) filler strip is recommended between units. A custom filler strip is required when installing two French door or side-by-side models. Dual installations without a filler strip can only be accomplished using two units with opposite hinges. Refer to the illustrations below.

Dual installation kits are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com. For ques- tions regarding the installation, call Sub‑Zero customer care at 800-222-7820.

For dual standard installations, panel dimensions are the same as for single installations. Refer to the charts on pages 20–23. Panel dimensions and offsets for dual flush inset installations are listed on the following pages.

WITHOUT FILLER STRIP

FILLER STRIP

Opposite hinges.

Same side hinges.

subzero.com/specs 27

Page 26 Page 28
Page 27
Image 27
Sub-Zero BI-30U, BI-36R, BI-36F, BI-48SD, BI-42UFD, BI-42S, BI-36UFD, BI-36UG manual Dual Installation, Without Filler Strip
Page 26 Page 28