Sub-Zero BI-36R, BI-36U, BI-36F, BI-48SD, BI-42UFD Side Panel, Handle Hardware, Standard Handles

BUILT-IN REFRIGERATION

Side Panel

The custom side panels must be a minimum of 24" (610) deep and 1/2" (13) thick. Routing will be necessary for the side panel to fit flush against the side of the unit. Refer to the illustrations below.

When installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are available through an authorized Sub-Zero dealer. For local dealer information, visit the find a show- room section of our website, subzero.com.

Handle Hardware

Optional stainless steel tubular and pro handles are avail­ able through an authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.

Refer to the chart below for the length and stud spacing of standard handles for built-in models.

STANDARD HANDLES

FULL DOOR	LENGTH	STUD SPACING
Tubular	637/8" (1622)	437/8" (1114)
Pro	453/16" (1147)	437/8" (1114)

24" (610)

FRONT

OF SIDE

PANEL

ROUT TO 1/8" (3)
17/8"(48)			84"
1" (25)
	(2134)
41/4" (108)
ROUT TO	53/4"
3/16" (5)	(146)
(OVER-AND-UNDER
MODELS)
	201/2"
	(521)
4" (102)
OPTIONAL		25/8"
TOE KICK
CUT-OUT	(67)

Side panel dimensions.

1" (25)
	17/8" (48)
1/8" (3)
1/2" (13)
MAIN	SIDE PANEL
FRAME	ROUTING

Routing detail.

OVER-AND-UNDER DOOR	LENGTH	STUD SPACING
Tubular	441/4" (1124)	361/4" (921)
Pro	371/2" (952)	361/4" (921)
30" DRAWER	LENGTH	STUD SPACING
Tubular	245/16" (633)	165/16" (414)
Pro	179/16" (447)	165/16" (414)
36" DRAWER	LENGTH	STUD SPACING
Tubular	305/16" (770)	225/16" (567)
Pro	235/8" (600)	225/16" (567)
42" DRAWER	LENGTH	STUD SPACING
Tubular	365/16" (922)	285/16" (719)
Pro	295/8" (753)	285/16" (719)

subzero.com/specs 31