Woods Equipment L306A-3, L59A-3 manual L59 A-3 Caster Assembly Optional

L59 A-3 CASTER ASSEMBLY (OPTIONAL)

REF	PART		QTY	DESCRIPTION	REF	PART		QTY	DESCRIPTION
					12	835	*	2	3/8 NC Hex nut, plated
1	29750		1	Right & left caster bundle
					13	765	*	1	1/2 NC Hex lock nut
2	12243		1	Caster yoke w/axle (includes bolt,
					14	23479		1	1/2 NC x 5 HHCS GR5
				nuts & sleeve)
3	29746	(a)	1	Right caster arm assembly	15	29368	(c)	1	1/2 x 3/4 OD x 3-3/8 Sleeve -or-
				(shown) 13-5/32" long -or-	15	12242	(c)	1	17 GA Wall x 5/8 OD x 3-3/8 tube
3	6761	(a)	1	Right caster arm assembly,	16	29375	(b)	2	3/4 Bore flanged bearing for 1-1/8
				16-5/32" long					hole -or-
4	29747	(a)	1	Left caster arm assembly,	16	4228	(b)	2	5/8 Bore flanged bearing for 1-3/8
				13-5/32 long -or-					hole -or-
4	18424	(a)	1	Left caster arm assembly,	16	65578	(b)	2	3/4 Bore x 1.385 flanged wheel
				16-5/32" long					bearing with groove
5	19703		1	8-1/2 Caster wheel with sleeve	17	22240		2	3/4 x 1-3/16 x 10 GA Flat washer
7	-----	*	1	Straight 1/4 self-tap grease fitting	18	4181		2	25/32 x 1 x 1/2 HT Sleeve
				(for steel wheel) -or-

7	195	*	1	Straight 1/8 pipe thread grease fit-
				ting (for polyethylene wheel)
8	21020		1	1/4 x 1-1/4 Spiral pin -or-
8	1285	*	1	1/4 x 1-1/2 Cotter pin
9	12296	*	1	1/4-28 Straight grease fitting,
				15/32"
10	12169	*	2	3/8 NC x 1-1/4 HHCS GR5
11	838	*	2	3/8 Standard lock washer

(a)For proper caster arm identifica- tion, refer to dimension “L” as shown on drawing. Caster arms may be used on either side to obtain best fit.

(b)Measure old bearing.

(c)Measure outside diameter of old sleeve.

*Standard hardware, obtain locally

15148 (Rev. 2/9/2007) Parts 41