OWNER SERVICE

The information in this section is written for operators who possess basic mechanical skills. Should you need help, your dealer has trained service technicians avail- able. For your protection, read and follow all safety information in this manual.

A WARNING

Before working underneath, block mower securely. Hydraulic system leak down and failure of mechanical or hydraulic system can cause equip- ment to drop.

Keep all persons away from operator control area while performing adjustments, service or maintenance.

A CAUTION

Always wear relatively tight and belted clothing to avoid entanglement in moving parts. Wear sturdy, rough-soled work shoes and protective equipment for eyes, hands, hearing and head.

LUBRICATION

Do not let excess grease collect on or around parts, particularly when operating in sandy areas. The accompanying illustrations show lubrication points. Lubrication intervals are based on normal operating conditions. Severe or unusual conditions may require more frequent lubrication.

Use a lithium grease of #2 consistency with a MOLY (molybdenum disulfide) additive for all locations. Be sure to clean fittings thoroughly before attaching grease gun. When applied according to the lubrication chart, one good pump of most guns is sufficient.

Spindle Lubrication

There are grease zerks on each of the three blade spindles. They are accessible without shield removal. Grease each spindle every 24 hours of operation with a good grade light-to-medium grease gun.

NOTICE

Do not over-grease spindles. Excess grease could be transferred to the belt and cause slippage or premature failure.

Figure 3. Spindle Lubrication

Caster Lubrication

Lubricate the caster pivot and caster wheel every eight hours of operation.

Figure 4. Caster Lubrication

BLADE SERVICING

Inspect blades before each use to determine that they are securely fastened and in good condition. Replace any blade that is bent, excessively nicked, worn, or has any other damage. Small nicks can be ground out when sharpening.

12 Owner Service

15148 (Rev. 2/9/2007)

 

 

Page 12
Image 12
Woods Equipment L59A-3, L306A-3 manual Owner Service, Lubrication, Blade Servicing