| 13 |
subzero.com/specs
Flush Inset Application
It is necessary to consider the following points when planning for a flush inset application:
• The flush inset depth is 56 mm deeper than the |
standard opening. |
• The flush inset width is 64 mm wider than the |
standard opening. |
• The flush inset height is 6 mm higher than the |
standard opening. |
• Panel widths increase to achieve the flush inset look. |
• You must allow a 13 mm reveal around the perimeter of |
STANDARD INSTALLATION
610 mm |
OPENING |
DEPTH |
TOP VIEW
FLUSH INSET INSTALLATION | |
WITH 19 mm PANEL | |
610 mm | 665 mm |
OPENING | FLUSH |
DEPTH | INSET |
| DEPTH |
| TOP VIEW |
56 mm | 32 mm |
the unit and grille to allow for proper door swing and |
airflow. |
IMPORTANT NOTE: The flush inset application is not a separate model. This is an overlay unit in a flush installa- tion. The same model is used in an overlay or flush inset application.
Rough opening dimensions for the flush inset application assume the use of a 19 mm decorative panel. The illustra- tions at right show the difference between standard and flush inset installations.
Standard installation. | Flush inset installation. |
