Sub-Zero ICBBI-42S manual Built-In Refrigeration Dual Installation Kit, Dual Wide Grille-Overlay

Built-In Refrigeration 27

Dual Installation Kit

INSTALLATION WITH DUAL WIDE GRILLE

This kit will replace the existing grilles that ship with the units and span the entire width of both units. The kit includes a 6 mm center trim strip (required for proper installation of the dual wide grille), heater, dual kickplate and mounting hardware. Dual wide grilles are available for all built-in models and design applications. The overlay dual installation kit with grille will accept overlay and dual flush inset panels. For dual wide grille panel dimensions, refer to the panel specifications below for your design application. Grille panel dimensions listed are for a standard 2134 mm finished height.

Dual Wide Grille—Overlay

TWO 762 mm MODELS	W	H
Overlay Panel	1530 mm	235 mm
Spacer Panel	1508 mm	211 mm
Backer Panel	1524 mm	227 mm
762 mm AND 914 mm MODELS	W	H
Overlay Panel	1683 mm	235 mm
Spacer Panel	1661 mm	211 mm
Backer Panel	1676 mm	227 mm
TWO 914 mm MODELS	W	H
Overlay Panel	1835 mm	235 mm
Spacer Panel	1813 mm	211 mm
Backer Panel	1829 mm	227 mm

Dual Wide Grille—Flush Inset

TWO 762 mm MODELS	W	H
Flush Inset Panel	1556 mm	235 mm
Spacer Panel	1508 mm	211 mm
Backer Panel	1524 mm	227 mm
762 mm AND 914 mm MODELS	W	H
Flush Inset Panel	1708 mm	235 mm
Spacer Panel	1661 mm	211 mm
Backer Panel	1676 mm	227 mm
TWO 914 mm MODELS	W	H

subzero.com/specs

INSTALLATION WITH INDIVIDUAL GRILLES

This kit is available for those who choose to utilize the individual grilles that ship with each unit. The kit includes a 6 mm filler strip (which fills the reveal between the units and grilles), heater and mounting hardware. This dual installation kit is not required if a custom filler strip is used. The filler strip should be a minimum of 51 mm wide. Refer to the full-scale template on page 32 for more information.

Flush Inset Panel	1861 mm	235 mm
Spacer Panel	1813 mm	211 mm
Backer Panel	1829 mm	227 mm