| 23 |
Dual Installation
FLUSH INSET APPLICATION
Installing two
Dual installations without a filler strip can only be accom- plished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illus- trations B and C require a filler strip. Refer to the
IMPORTANT NOTE: The application shown in illustration A can only be achieved by installing dual flush inset panels. Failure to install dual flush inset panels will cause the handle side of the panels to collide when closing. In this application a dual installation accessory kit is also required.
Dual flush inset panels and dual installation kits are avail- able through your authorized
subzero.com/specs
Dual Installation Panel Requirements
MAX WEIGHT PER PANEL |
|
All Models | 23 kg |
Dual Wide Grille Panel | 12 kg |
MIN PANEL THICKNESS |
|
Flush Inset Panels | 16 mm |
|
|
WITHOUT FILLER STRIP |
FILLER STRIP REQUIRED |
FILLER STRIP REQUIRED |
Illus. A | Illus. B | Illus. C |