Sub-Zero ICBBI-48SD, ICBBI-42S Built-In Refrigeration Overlay Panels, Overlay Panel Requirements

Built-In Refrigeration 10

Overlay Panels

If you and your client have ordered an overlay model, you will be adding panels and handles to give the unit a more custom look. The overlay panel design option is available for all built-in overlay models. For exact door panel dimen- sions, refer to overlay panel specifications on the following pages.

IMPORTANT NOTE: Overlay models can be used in an overlay or a flush inset application. Be aware that the application specified will affect panel sizes, rough opening dimensions and installation.

The overlay design allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. The most common way to achieve this look is to work with three panels—the decora- tive overlay panel, which is typically 19 mm, a 3 mm spacer panel and a 6 mm backer panel. Depending on your cabinet manufacturer, this could also be one panel routed for different dimensions.

The illustrations provide a cross section view of the three- panel assembly, showing placement of the trim and a rear view of the three-panel assembly with critical dimensions, standard for all built-in models.

Overlay grille panels for the panel grille match the design of the overlay door panels. Dimensions for the grille panel are listed in the overlay panel specifications on the follow- ing pages.

IMPORTANT NOTE: When installing two units in a side-by- side application, refer to pages 21–22 for dual standard installations. Be aware that rough opening dimensions are different for this application.

Do not exceed overlay panel dimensions, as this could cause damage to panels and the Sub-Zero unit.

Regardless of the physical construction of the panels (three-panel assembly or routed panel), you will need to follow the overlay panel specifications on the following pages for exact sizing and panel placement to ensure a proper fit.

Overlay Panel Requirements

MAX WEIGHT PER PANEL
All Overlay Models	23 kg
Grille Panel	6 kg
MIN PANEL THICKNESS
All Overlay Panels	16 mm

SPACER PANEL

OVERLAY PANEL

BACKER PANEL

TRIM

8 mm min

3 mm

OVERLAY		SPACER
PANEL		PANEL
		BACKER
		PANEL
19		6
mm	3
		mm
typical	mm

Panel assembly cross section. Panel assembly rear view.