Sub-Zero UC15IO Ice Machine Installation, Reverse Door Swing, Remove top cover, Bottom trim plate

Ice Machine Installation 11

Reverse Door Swing

5)Remove the ice machine top cover by removing the two screws along the back of the unit. Refer to the illustration below.

6)Remove four screws from the front top rail. Refer to the illustration below.

7)Pivot the top rail end for end to expose the two left- hand top hinge screw holes and reinstall.

subzero.com/specs

8)Remove two screws from the lower edge of the bottom trim plate and slide the trim plate to the right, to cover the right-hinge mounting screw holes. The left-hinge mounting screw holes will now be exposed. Refer to the illustration below.

9)Reinstall the door by mounting hinges using the left- hinge mounting holes. Reinstall the shim removed in step 1, between the cabinet and bottom hinge. Check operation of the door by opening it.

TOP COVER

SCREWS

TOP RAIL

SCREWS

TRIM PLATE

SCREWS

Remove top cover. Remove front top rail.

Bottom trim plate.