Summit 225D6783P011 manual where to start?, installation, positioning, choosing a location

6

where to start?

choosing a location

Choose a place for your refrigerator. We recommend a large space that can be kept clean and dry to prevent oxidation.

positioning

To ensure that the refrigerator works correctly, it’s important that air can circulate. We recommend the following minimum surrounding distances:

model	ingenious	ingenious	prismatic	prismatic		glass	glass
Capacity
Total Dimensions	cm	cm	cm		cm	cm		cm
(closed doors)

Depth

Width

Total Dimensions

(open doors)

Depth

Width

•10 cm on both sides, 10 cm at the back, between 5 and 10 cm on top.

•Don’t position it near heat-generating appliances such as hobs, heaters, or in areas exposed to sunlight. This could overwork the refrigerator, making it less efficient and increasing energy consumption.

•Don’t lean it against a wall.

Observing these distances and recommendations will guarantee you a fully-functioning product, as it will prevent the components from direct contact with walls and furniture, thus avoiding unpleasant sounds.

working width

working depth

door opening direction

installation

You must remove all packaging including:

tape, cardboard, plastic, and/or Styrofoam (EPS).

The refrigerator must not be connected to an energy source before installation.

important

Top

Corner packaging

Base

Let the refrigerator stand for 6 to 8 hours before connecting it to allow the cooling gas and the compressor oil to settle.