Summit SPW1200P user manual Selecting Wash Cycle, English, Heavy Cycle, Normal Cycle

English

Selecting Wash Cycle:

When you turn the power "ON", the machine will set the standard wash program to "Heavy" wash position. You will see the red light lit up at both Heavy wash cycle and Wash Cycle Mode position.

For your convenience, you can select from four fabric care wash cycles: Heavy, Normal, Gentle and Quick Wash. Select the appropriate cycle based on the fabric type.

If you want to select your desired option at this time, use down arrow ( ) to select the proper wash cycle for your load.

Heavy Cycle:

This is used for work & play, household linens and heavy to lightly soiled cottons clothes. With heavy wash speed, the agitator moves faster. This cycle is approximately 44 to 50 minutes.

Note: If you want to select "Soak" option when using this cycle, select "Process Mode" by pressing left arrow ( ) on select button. Once you are at that setting, press the down arrow ( ) five times on select button to set this option. You will see SoakWashRinse Spin sequence lit up with red light. The soak time will be approximately 35 minutes in this cycle.

Normal Cycle:

This is used for soiled permanent press, silks, woolens, nylon and acrylic fabrics. With normal wash speed, the agitator moves faster. This cycle is approximately 44 to 50 minutes.

Note: If you want to select "Soak" option when using this cycle, select "Process Mode" by pressing left arrow ( ) on select button. Once you are at that setting, press the down arrow( ) five times on select button to set this option. You will see SoakWashRinse Spin sequence lit up with red light. The soak time will be approximately 25 minutes in this cycle.

10