English

Selecting Wash/Rinse Temperature:

When you turn the power "ON", the initial temperature is set at "Hot/Cold" position. You will see the red light lit up at this position. For your convenience, there are three temperature options you can select from based on the fabric type: Hot/Cold, Warm/Cold and Cold/Cold.

If you want to select your desired option at this time, follow the procedure below.

1.Keep pressing left arrow ( ) on select button until the red light of the "Temp Select" button is lit up.

2.Once you are at this setting, use down arrow ( ) to select the proper temperature option for your clothes.

Always refer to the label on the garment for proper temperature that is recommended by garment manufacturers. See the reference chart below to select proper temperature for the fabrics.

WASH/RINSE

TYPES OF FABRICS

Cold/Cold

Non-colors Fabrics, lingerie

 

with light or normal soil

 

clothes & special care fabrics

Warm/Cold

Delicate & colors Fabrics

Hot/Cold

Sturdy whites & colors

 

Fabrics such as work & play

 

clothes, soiled fabrics

Start/Pause Button:

After selecting your options and closing the washer door properly, you need to press the "Start/Pause" button to start the washer.

START

PAUSE

If you want to pause during the cycle, simply press "Start/Pause" button. This will stop the activity during the cycle until you press this button again to resume the cycle.

13

Page 14
Image 14
Summit SPW1200P user manual Selecting Wash/Rinse Temperature, Start/Pause Button