Chapter 4 Managing Fabric Security 97
FIGURE4-9 Add Server
To add a RADIUS server, do the following:
1. Open the faceplate display, open the Switch menu, and select Radius Servers.
2. In the Radius Server Information dialog (FIGURE 4-9), click the Add Server tab.
3. Select the server type (Device, User, Account).
4. In the IP Address field, enter the remote IP address of the server.
5. In the UDP Port field, enter the remote UDP port number of the Authentication
Radius Server. The Radius Accounting Server UDP port will always be the value
of Device/User Authentication Server UDP Port + 1.
6. In the Timeout field, enter the timeout value in seconds (minimum of 1 second,
maximum of 30 seconds). This is the number of seconds the RADIUS client will
wait for a response from the RADIUS server before retrying, or giving up on a
request.
7. In the Retries field, enter the number of retries. This is the maximum number of
times the RADIUS client will retry a request sent to the primary RADIUS server.